[China Glass Net] Tempered glass is a glass with high wind pressure resistance, cold and heat resistance, and even if it is broken, the fragments are evenly small particles, instead of the knife-like tip left after the ordinary glass is broken. The horn, so its tempered glass door is also considered a safety glass door.
Even so, tempered glass door glass still has a self-explosion rate of three thousandths. In addition to the quality of tempered glass, the rigor of installation and use is also an important factor related to safety.
1 custom doors and windows, tempered glass cutting
If the tempered glass door does not meet the installation size, it is very troublesome to rework, so it is necessary to be accurate when starting the measurement.
The measurement of tempered glass mainly includes two aspects of the width and height of the glass plate. When measuring the width of the glass plate, measurements were made at the bottom, middle, and top, respectively, and the smaller size was selected as the width of the cut. If the data obtained from the top, middle and bottom are identical, then 3-5 mm is reduced in the measured dimensions as the cutting width of the glass.
Similarly, the height of the glass plate should include the installation location for inserting the upper and lower rails, so it is generally taken to cut less than 3-5 mm of the measured data.
2 treatment and installation of tempered glass
After the glass plate is cut by size, it is usually necessary to chamfer the four corners, and the fine grinding wheel is generally used for slow grinding operation.
Then the fixed bottom bracket is fixed, and the aluminum alloy door and window are fixed by the aluminum alloy frame, and are fixed on the frame with the aluminum angle.
Use a glass suction cup to first pass the glass plate to the west and place the glass in place. Insert the upper part of the glass into the limit groove of the door frame, and then place the lower part of the glass plate in the opposite seam of the bottom cover.
3 glue seal, door and window molding, windproof and waterproof
The glass plate is fixed in thickness, and is sealed at the fixing portion of the top limit groove and the bottom plate, and at the seam of the glass plate and the frame column. Use a plastic sheet to flatten the glue on both sides of the glass and wipe off the residue. Be careful when wiping the remnants. Try not to use sharp objects such as blades.
After the height of the door is determined, the glass strips are inserted into the gaps on both sides of the crosspiece, and small wooden strips are inserted from both sides, tapping and stabilizing, and injecting glass glue into the gap formed between the small wooden strips, the door leaf glass and the crosspiece, The residue is treated as above.
Mens wetsuit top is made from thinner neoprene with super stretch jersey. Usually, it was 1mm, 1.5mm, 2mm, 2.5mm and no less than 3mm. And if you wanna waterproof, it can be GBS stitched. If you wanna economy, it can be flatlock stitched. We can meet different demands for the various market groups. And the wetsuit top can be used for surfing in summer, summer is the popular season to have a wetsuit top for surfing.
Mens Wetsuit Top,Wetsuit Jacket Mens,Wetsuit Top Mens,Best Mens Wetsuit
Shenzhen Seaskin Sports Goods Co., Ltd. , https://www.seaskinwetsuit.com