Weaving products, drying technology and drying standards for wickerwork products

Willow products stained with paint, drying technology and drying standard paint, drying, drying method First, before wearing the labor protection products:

1, correctly wear protective equipment - activated carbon masks;

2, correctly wear protective equipment - protective glasses;

3. Wear a work cap and work clothes to prevent liquid from splashing on the skin.

4. Wear rubber protective gloves to prevent chemicals from injuring hands or permeating through the skin.

Second, the operating standard of the paint

1. Slowly press the product into a good lacquer solution;

2. Immerse the product completely in the paint solution;

3, slowly put the product completely immersed in the paint solution, and pause in the air for a while, in order to facilitate the product of the paint flow back to the paint cylinder;

4. Put the painted product on the console and push it forward.

Third, the product hanging pick operation standards:

1. Hang the removed product on the bottom hook of the hanging hook;

2, the product will be taken out of the middle hook linked to the county hook;

3. Hang the large size on the hook on the top of the hanging hook;

4, the dried paint products from the largest to the smallest off the package;

5. The well-packaged product is discharged to the row of cars neatly and then sent to the packing workshop after it is full;

6, the product should be handled lightly when loading and unloading, according to the designated location drained.

Fourth, the drying process technical parameters:

1. The temperature of the lacquer product operating area is controlled at 20-30°C. After the product is hung, it shall be dripping paint on the drying outdoor hanging line for 15 minutes;

2. After the paint has been applied, the product enters the drying room and is dried for 60 minutes.

3. After drying the outdoor hanging line for 20 minutes, enter the drying room again;

4, dried products after drying in the drying room for 80 minutes, hanging line out of the drying room;

5, drying room humidity maintained at 15-25 °C, temperature maintained at 60-75 °C.

Fifth, drying standards 1, a processed product, if the paint, the general use of drying technology, but some products can be directly drying.

2. Drying should be carried out on a sunny day. The product should be swung open. Some sets of products can also be swung open. The front of the product faces the sun.

3, general product drying can be packed in about 8 hours.

3, general product drying can be packed in about 8 hours.

2. Drying should be carried out on a sunny day. The product should be swung open. Some sets of products can also be swung open. The front of the product faces the sun.

3, general product drying can be packed in about 8 hours.

1, a processed product, if the paint, the general use of drying technology, but some products can be directly drying.

2. Drying should be carried out on a sunny day. The product should be swung open. Some sets of products can also be swung open. The front of the product faces the sun.

3, general product drying can be packed in about 8 hours.