Recently, the Guangzhou Municipal Bureau of Quality and Technical Supervision conducted supervision and spot checks on the quality of sweaters in the production areas of the city. A total of 54 batches of products produced by 54 companies were spot-checked. After inspection, 9 batches of products produced by 9 companies did not meet the standard requirements. .
This random inspection is based on the mandatory national standard GB 5296.4 “Instructions for the Use of Consumer Products: Instructions for Use in Textiles and Garmentsâ€, GB 18401 “National Safety Technical Code for Textile Productsâ€, FZ/T 73009 “Cashmere Knitwearâ€, FZ/T 73018 “Wool Knitting "Products" and Other standards for decomposable carcinogenic aromatic amine dyes, formaldehyde content, pH value, fiber component content, water fastness, perspiration fastness, rubbing fastness, soaping fastness, color fastness Degree, top breaking strength and identification and other items are tested.
After inspection, there were five batches of products with unqualified fiber components in this spot check, involving “Ai Zhe†wool sweaters, “Su Yan†sweaters, “water clouds†wool fabrics, “ruohao†sweaters, and “HIMuomoâ€. "Knitwear and other branded products. Fiber content is one of the important quality indicators of apparel products, and it is also one of the important factors that determine the value of products. There are two cases of unsatisfactory performance: First, the measured fiber content is not consistent with the label value, such as marked "acrylic fiber 71.6%, wool 28.4%", the actual test result is "acrylic fiber 52%, nylon 27%, wool 21%"; The second is that the name of fiber components is not standardized. For example, “bamboo fiber 57%, cotton 25%, and nylon 18%†are used. The measured results are “fibre 57%, cotton 24%, and nylon 19%â€. The main reasons for the disqualification were as follows: First, companies did not take effective measures to ensure the composition and content of fibers when purchasing fabrics; second, some companies did not understand the product standards, resulting in incorrect labeling of fiber components; third, the presence of individual companies was confusing and inferior. Fill up the act of capturing illegal interests.
In addition, the "Baizi" knitwear, "Idali. Milan" sweaters, "Miyaga" knitted casual sweaters, "Lex LES" sweaters were checked for outstanding fastness items. Color fastness is the degree of firmness of textiles subjected to external factors (friction, water, perspiration, sun exposure, etc.) during use or processing. Clothes with poor color fastness can affect the appearance during use, and even endanger health when severe. The main reason for the failure was that the manufacturer did not strictly control the dyeing process of the fabric or used inferior dyes.
This random inspection is based on the mandatory national standard GB 5296.4 “Instructions for the Use of Consumer Products: Instructions for Use in Textiles and Garmentsâ€, GB 18401 “National Safety Technical Code for Textile Productsâ€, FZ/T 73009 “Cashmere Knitwearâ€, FZ/T 73018 “Wool Knitting "Products" and Other standards for decomposable carcinogenic aromatic amine dyes, formaldehyde content, pH value, fiber component content, water fastness, perspiration fastness, rubbing fastness, soaping fastness, color fastness Degree, top breaking strength and identification and other items are tested.
After inspection, there were five batches of products with unqualified fiber components in this spot check, involving “Ai Zhe†wool sweaters, “Su Yan†sweaters, “water clouds†wool fabrics, “ruohao†sweaters, and “HIMuomoâ€. "Knitwear and other branded products. Fiber content is one of the important quality indicators of apparel products, and it is also one of the important factors that determine the value of products. There are two cases of unsatisfactory performance: First, the measured fiber content is not consistent with the label value, such as marked "acrylic fiber 71.6%, wool 28.4%", the actual test result is "acrylic fiber 52%, nylon 27%, wool 21%"; The second is that the name of fiber components is not standardized. For example, “bamboo fiber 57%, cotton 25%, and nylon 18%†are used. The measured results are “fibre 57%, cotton 24%, and nylon 19%â€. The main reasons for the disqualification were as follows: First, companies did not take effective measures to ensure the composition and content of fibers when purchasing fabrics; second, some companies did not understand the product standards, resulting in incorrect labeling of fiber components; third, the presence of individual companies was confusing and inferior. Fill up the act of capturing illegal interests.
In addition, the "Baizi" knitwear, "Idali. Milan" sweaters, "Miyaga" knitted casual sweaters, "Lex LES" sweaters were checked for outstanding fastness items. Color fastness is the degree of firmness of textiles subjected to external factors (friction, water, perspiration, sun exposure, etc.) during use or processing. Clothes with poor color fastness can affect the appearance during use, and even endanger health when severe. The main reason for the failure was that the manufacturer did not strictly control the dyeing process of the fabric or used inferior dyes.
Baseball Cap,Promotional Cap,Embroidery Cap
Ying Zhong Garments Company Limited , http://www.dg-caps.com